Common Application of 1000 series pure aluminum plate

- Nov 09, 2018-

Whether it is pure aluminum or alloy plates are collectively referred to as aluminum plates, many users are not clear about the difference between different grades of aluminum plates. Take the example of pure aluminum plate, even if it is an aluminum plate containing more than 99% aluminum, the performance is also different due to various factors such as the slight difference in aluminum content, different smelting and casting processes, different forging times, and different heat treatment processes. Therefore, the use of different grades of aluminum plates is also different. Here's a look at the use of a series (pure aluminum):

1050 aluminum plate extrusion, coils for food, chemical and brewing industries, various hoses, fireworks powder.

1060 aluminum plate requires high corrosion resistance and formability, but the strength is not high, chemical equipment is its typical use, such as insulation aluminum coil, anti-corrosion aluminum coil.

1100 aluminum sheet is used for processing parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry equipment and storage containers, sheet processing parts, deep drawing or spinning concave vessels , welding parts, heat exchangers, printing plates, nameplates, reflective appliances.

1145 aluminum plate is suitable for packaging and insulation aluminum foil, heat exchanger.

1199 aluminum plate is used as an electrolytic capacitor foil and an optical reflective deposition film.

1350 aluminum plate is used as a wire, a conductive strand, a bus bar, and a transformer strip.

The above-mentioned aluminum plates are the most common on the market. Their chemical and mechanical properties follow internationally uniform standards, and their performance basically reaches the lower and upper limits of pure aluminum plates. If there is a higher requirement for the performance of the aluminum plate, then it is necessary to help the aluminum alloy plate, and we will introduce it next time.