Common daily maintenance points in aluminum sheet processing centers

- Oct 30, 2018-

The application of CNC aluminum plate machining center is more and more extensive, and its processing flexibility, high precision, high production efficiency, and many advantages. However, due to the increasingly advanced and complex technology, the quality of maintenance personnel is very high, requiring them to have deep professional knowledge and rich maintenance experience. The correct operation and maintenance of the CNC aluminum plate machining center is the correct use of CNC aluminum plate processing. One of the key factors in the central machine tool. Proper operation can prevent abnormal wear of the machine tool and avoid sudden failures; daily maintenance can ensure that the equipment maintains a good technical state, thus ensuring safe operation.

Some common daily maintenance points of CNC aluminum plate processing center:

1. When the aluminum plate machining center fails, the operator should pay attention to the storage site, and truthfully explain the situation before and after the failure to the maintenance staff to facilitate analysis and diagnosis of the cause of the failure and timely elimination.

2. To prevent dust and dirt from entering the inside of the numerical control device

In the air of the machine shop, oil mist, dust and even metal powder are generally present. Once they fall on the circuit board or electronic device in the numerical control system, the resistance between the components is easily reduced, and even the components and the circuit board are caused. damage.

3. To prevent system overheating

Check the air duct filter for blockage every six months or quarterly. If it is not cleaned in time, the temperature inside the CNC cabinet will be too high.

4. The maintenance of the standby circuit board

When the spare printed circuit board is not used for a long time, it should be installed in the numerical control system for a period of time to prevent damage.